7200-102 — модуль создания воздушного потока, LI-COR

7200-102 — модуль создания воздушного потока, LI-COR
Цена по запросу
Кат. №: 7200-102
Производитель: LI-COR

The flow module provides controlled air flow through the gas analyzer. Although optional, the flow module is recommended because it provides flow data that is recorded in the gas analyzer dataset.

The connector panel features an air outlet (EXHAUST), power cable connector, communications cable connector, and a ground lug. Early models (7200-101) have the intake on the bottom of the enclosure. Later models (7200-102) have the intake on top of the enclosure. Otherwise, the flow modules are the same.

Inside the case, you'll find a panel with indicator LEDs and controls. Although you can alter the flow settings and read diagnostics through the control panel, we recommend controlling flow through the software.

Note: When you start up the system for the first time, record the Pressure Drop and Motor Drive (%) readings to establish a baseline of normal, unobstructed readings.

Flow Rate Settings: 10-18 SLPM (standard liters per minute) setpoint mode or constant blower drive mode.

Blower Pressure: 3.5 kPa minimum at 100% blower drive at 101.3 kPa and 27 °C ambient.

Accessory Link: UART on RS-485 cable.

Power Requirements:

10.5 - 30 VDC; 50 W Maximum

Typical <15 W @ 25 °C, 15 liters/min. at 0.75 kPa vacuum

Operating Conditions: -20 °C to +50 °C; IEC IP55 specified; Designed for outdoor installation

Size: 35 cm × 30 cm × 15 cm

Weight: 13.7 lbs. (6.2 kg).

С нами выгодно!
Гибкая ценовая политика!
Хотите уточнить условия сотрудничества?